Phynix 10544 Paint Thickness Gage Surfix easy Description : Paint thickness gage for ferrous and non ferrous metals MMeasuring range for steel : 0 ... 3 500 μm for non-ferrous metals : 0 ... 3 000 μm Accuracy :
Additional Details | Description = Paint thickness gauge for ferrous and non ferrous metals|Measuring range for steel = 0 ... 3 500 μm| |
---|
Phynix 10544 Paint Thickness Gauge Surfix easy Design Integrated Probe Measuring range iron/steel 0 – 3.500 µm Measuring range non-ferrous metals 0 – 3.000 µm Accuracy ± 2 µm + 2 % of value (higher value is applied) Resolution 0 – 1.000 µm: 1 µm / 1.000
The handy Surfix® easy I-FN is a universally applicable coating thickness measurement gauge, which is suitable for the rough use in the production as well as in the laboratory. It allows for calibration free measurements on steel/iron and non-ferrous metals (e.g. aluminum). When performing difficult measuring tasks the calibration function is available. Integrated online statistics allow for an easy analysis of the gathered data.
The measuring probes of the Surfix® easy series have a highly wear-resistent carbide pole tip and therefore almost unlimited durability. The plastic foot is equipped with a v-groove and ensures an upright positioning even on cylindrical or curvatured surfaces
The Surfix® easy I-FN operates with two proven measuring principles for coating thickness measurements: the magnetic and the eddy current principle (DIN EN ISO 2178 and 2360). Both principles provide high accuracy even on thin coatings on steel and non-ferrous metals. The selection of the measuring principle is made automatically when the probe is put on the surface.
Application areas
The Surfix® easy I-FN is ideal for users, who are looking for a simple way of coating thickness measurement without giving up on statistics, a hard-wearing pole tip and quality „Made in Germany“. Surfix® easy I-FN gauges are used e.g. in:
- Paint shops
- Paint and powder-coatings
- Repair shops and experts
- Steel industry
- Automotive industry
- Ship building industry
- Incoming goods
- Quality management during productions
- Final inspection
- Laboratory
Advantages at a glance
-
Innovative and user friendly measurement technology: switch on and measure
- Measurements on even, rough and curvatured surfaces
- Measurements on steel/iron and non-ferrous metals
- Automatic recognition of the base material
- Easy detection of zinc layers under coatings
- Calibration-free measurements
- Online-statistics (N, x, s, Min, Max)
- Big surface for safe positioning
- Acustic signal after measuring
- Selectable µm/mils
- Producer inspection certificate
- Integrated probe
- 2 years warranty
Technical specifications Surfx® easy I-FN – 10544
Design | Integrated Probe |
Measuring range iron/steel | 0 – 3.500 µm |
Measuring range non-ferrous metals | 0 – 3.000 µm |
Accuracy | ± 2 µm + 2 % of value (higher value is applied) |
Resolution | 0 – 1.000 µm: 1 µm / 1.000 - 2.500 µm: 2 µm / 2.500 - 3.500 µm: 5 µm |
Carbide pole tip | • |
Calibration | Factory-, zero calibration |
Statistics | Number of measurements, average, standard deviation, minimum, maximum |
Display | 4-digit alphanumeric, height 8 mm |
Operating temperature | 0° C to + 60 °C |
Surface temperature | –15 °C to + 60 °C |
Dimensions (gauge) | 110 mm x 50 mm x 25 mm |
Dimensions (probe) | Integrated |
Weight | 90 g incl. batteries |
Protection class | IP 52 (protection against dust and dripping water) |
Standards | DIN, ISO, ASTM, BS |
Recommended application | Compact device |
Warranty | 2 years |
Limit values
Smallest curvature radius for convex surfaces | 5 mm |
Smallest curvature radius for concave surfaces | 50 mm |
Smallest operation height | 125 mm |
Smallest measurement area | 10 x 10 mm |
Smallest base material thickness – F | 0.5 mm |
Smallest base material thickness – N | 50 µm |