Mitutoyo 3 Point Micrometer 368-996 Extension code: 952622 Extension Length: 6" Range: 0.800"-2.000" Setting ring code numbers: 177-184 177-291. Setting ring sizes: 1.000" & 1.600"
Item number:
368-996
| Select Micrometer Type | Sets of 3 point Analogue |
|---|---|
| Type of Micrometer | Analogue Sets of 3 point Micrometers Ratchet operated |
| Digital, Non-Digital | Non-Digital |
| Micrometer Range | .8-2" |
| micrometer in set | .8-1, 1-1.2, 1.2-1.6, 1.6-2" |
| Measurement units | Inch |
| Graduation | .0002" |
| Measuring faces | Hardened Tool Steel ( Not Titanium Coated) |
Mitutoyo 3 Point Micrometer 368-996 Extension code: 952622 Extension Length: 6" Range: 0.800"-2.000" Setting ring code numbers: 177-184 177-291. Setting ring sizes: 1.000" & 1.600"
Availability:
In stock
Item number
368-996
US$2,666.00
US$2,666.00
Holtest 3 Point Internal Micrometer
3 point contact (Self centering)
-Contact Points are made of hardened alloyed steel
-Can be fitted with extension rods for deeper holes
-Boxed sets are also supplied with Extension Rod (100 or 150mm) Spanner and Hex-Wrench
-Clear graduations on satin chrome finish
Series 368
FEATURES
The Holtests (type II) have three contact points made of alloyed steel.
Measurement can be taken closer to the bottom of the blind bore.
Can measure deep holes using an Extension Rod (optional).
With Ratchet Stop for constant force.
Setting Rings for zero point adjustment are optional.
Supplied in fitted plastic case up to 100mm / 4”. Over 100mm / 4” supplied in wooden case.
Technical Data
Graduation: 0.005mm or .0002"
Measuring method: Three-point method
Contact point: Harden Steel
Optional Accessories
952621: Extension rod 150mm / 5.9” For range 12-20mm / .5 - .8” models
952622: Extension rod 150mm / 5.9” For range 20-50mm / .8 - 2” models
952623: Extension rod 150mm / 5.9” For range 50-300mm / 2 - 12” models
3 point contact (Self centering)
-Contact Points are made of hardened alloyed steel
-Can be fitted with extension rods for deeper holes
-Boxed sets are also supplied with Extension Rod (100 or 150mm) Spanner and Hex-Wrench
-Clear graduations on satin chrome finish
Series 368
FEATURES
The Holtests (type II) have three contact points made of alloyed steel.
Measurement can be taken closer to the bottom of the blind bore.
Can measure deep holes using an Extension Rod (optional).
With Ratchet Stop for constant force.
Setting Rings for zero point adjustment are optional.
Supplied in fitted plastic case up to 100mm / 4”. Over 100mm / 4” supplied in wooden case.
Technical Data
Graduation: 0.005mm or .0002"
Measuring method: Three-point method
Contact point: Harden Steel
Optional Accessories
952621: Extension rod 150mm / 5.9” For range 12-20mm / .5 - .8” models
952622: Extension rod 150mm / 5.9” For range 20-50mm / .8 - 2” models
952623: Extension rod 150mm / 5.9” For range 50-300mm / 2 - 12” models
Mitutoyo 3 Point Micrometer 368-996
