Mitutoyo 544-536 Mitutoyo Laser Micrometer LSM-503S Measuring Range : 0.3-30mm/0.012-1.18"
Item number:
544-536
Number of Scans | 3200/sec |
---|---|
Protection level | IP64 |
Laser scanning rate | 4449in/s 113m/s |
Measuring region | .08x.4in 10x30mm |
Applicable display unit | LSM-6200 |
Measuring Range | .012-1.18in 0.3-30mm |
Part Number | 544-536 |
video | Repeatability with Laser Micrometer |
Additional Details | Resolution=0.02-100µm| Accuracy Narrow Range=± (0.6 + 0.1 ∆D)µm [∆D:mm]|Scanning Speed =226m/s|Protection standards=FDA, IEC| |
Mitutoyo 544-536 Mitutoyo Laser Micrometer LSM-503S Measuring Range : 0.3-30mm/0.012-1.18" .................Requires 544-072E LSM6200
Availability:
In stock
Item number
544-536
US$7,530.00
US$7,530.00
Mitutoyo Laser Micrometers
High speed scanning
- Suitable for in line measurements
- Visible and invisible laser types available
- Supplied with individual I.D. unit to compensate for optical errors when connected to the chosen display unit
- Can be used with either LSM5000/6000 display units (optional)
- Calibrated Gauge set 02 AGD150 (optional)
- IP64 protected level
Laser Scan Micrometer LSM-500S Series 544-High Accuracy Non-contact Measuring System
Series 544
FEATURES
[*1]: Measuring range available when set to "No extra-fine wire measurement"or "Edge specification" in the basic setup mode.[*2]: Environment for accuracy validation: 20ºC 1ºC temperature; 50% 10% humidity.
[*3]: The value of 2 o with a 2mm-diameter gage has been measured for two minutes with a measurement interval of 0.32 seconds, where is the standard deviation.
[*4]: The value of measurements in the center of the measurement region.
[*5]: Error due to the positional shift of the workpiece in the optical axis direction or scanning direction
[*6]: Averaging scans between 1 and 8 times can be made if "No extra-fine wire measurement" is specified in the basic setup mode.
The measuring range, however, is limited to 0.1mm to 2mm in this case
Mitutoyo 544-536 Mitutoyo Laser Micrometer LSM-503S Measuring Range : 0.3-30mm/0.012-1.18"